Search

Start Over Committee Member Edward William Reutzel

1. Investigation of Process Parameter Optimization of Laser-Fired Back Contact Silicon Solar Cells

open_access
Open Access
Author:
DeCesar, Brennan Lawrence
Title:
Investigation of Process Parameter Optimization of Laser-Fired Back Contact Silicon Solar Cells
Graduate Program:
Engineering Science
Keywords:
Laser-Fired Contacts
LFC
LFCs
Solar Cells
Silicon Solar Cells
Silicon Photovoltaics
File:
Download DeCesar_MSThesis.pdf
Committee Members:
Dr Ted Reutzel, Dr S Ashok, Thesis Advisor/Co-Advisor
Edward William Reutzel, Thesis Advisor/Co-Advisor
S Ashok, Thesis Advisor/Co-Advisor

2. CHARACTERIZATION AND OPTIMIZATION OF LASER-DOPED SELECTIVE EMITTERS FOR APPLICATIONS IN SILICON SOLAR CELLS

open_access
Open Access
Author:
Woolridge, Jillian J
Title:
CHARACTERIZATION AND OPTIMIZATION OF LASER-DOPED SELECTIVE EMITTERS FOR APPLICATIONS IN SILICON SOLAR CELLS
Graduate Program:
Engineering Science
Keywords:
silicon solar cells
selective emitters
laser doping
File:
Download Woolridge_MS_Thesis_Final.pdf
Committee Members:
Dr Reutzel/Dr Ashok, Thesis Advisor/Co-Advisor
Edward William Reutzel, Thesis Advisor/Co-Advisor
S Ashok, Thesis Advisor/Co-Advisor

3. Parameter Optimization of Laser-doped Selective Emitters for Applications in the Silicon Photovoltaic Industry

open_access
Open Access
Author:
Heinrichs, Holly E
Title:
Parameter Optimization of Laser-doped Selective Emitters for Applications in the Silicon Photovoltaic Industry
Graduate Program:
Engineering Science
Keywords:
Laser Doped Selective Emitters
Laser Doping
Q-switched
Continuous wave
Electrical comparison
Parameter Optimization
File:
Download Holly_Heinrichs_-_Parameter_Optimization_of_Laser_Doped_Selective_Emitters_Final_Thesis.pdf
Committee Members:
S Ashok, Thesis Advisor/Co-Advisor
Edward William Reutzel, Thesis Advisor/Co-Advisor
Suzanne E Mohney, Thesis Advisor/Co-Advisor

4. Laser-fired contact formation on metallized and passivated silicon wafers under short pulse durations

open_access
Open Access
Author:
Raghavan, Ashwin Sreekant
Title:
Laser-fired contact formation on metallized and passivated silicon wafers under short pulse durations
Graduate Program:
Materials Science and Engineering
Keywords:
laser-fired contact
silicon wafer
photovoltaic device
heat transfer and fluid flow
laser-material interaction behavior
File:
Download ARaghavan_Dissertation2014.pdf
Committee Members:
Tarasankar Debroy, Dissertation Advisor/Co-Advisor
Todd Palmer, Dissertation Advisor/Co-Advisor
Suzanne E Mohney, Committee Member
S Ashok, Committee Member
Edward William Reutzel, Special Member

5. 3D Spatial Reconstruction of Thermal Characteristics in Directed Energy Deposition through Optical Thermal Imaging

open_access
Open Access
Author:
Kriczky, Dennis Andrew
Title:
3D Spatial Reconstruction of Thermal Characteristics in Directed Energy Deposition through Optical Thermal Imaging
Graduate Program:
Mechanical Engineering
Keywords:
thermal metrics
thermal imaging
directed energy deposition
3D spatial reconstruction
Ti-6Al-4V
File:
Download DennisKriczkyThesisFinal.pdf
Committee Members:
Panagiotis Michaleris, Thesis Advisor/Co-Advisor
Edward William Reutzel, Thesis Advisor/Co-Advisor

7. Thermo-mechanical Model Development and Experimental Validation for Directed Energy Deposition Additive Manufacturing Processes

open_access
Open Access
Author:
Heigel, Jarred Christopher
Title:
Thermo-mechanical Model Development and Experimental Validation for Directed Energy Deposition Additive Manufacturing Processes
Graduate Program:
Mechanical Engineering
Keywords:
Additive manufacturing
laser cladding
distortion
convection
finite element analysis
residual stress
in situ measurement
File:
Download HeigelDissertation.pdf
Committee Members:
Panagiotis Michaleris, Dissertation Advisor/Co-Advisor
Ashok D Belegundu, Committee Member
Eric Russell Marsh, Committee Member
Allison Michelle Beese, Committee Member
Todd Palmer, Committee Member
Edward William Reutzel, Special Member

8. thermo-mechanical model development and experimental validation for metallic parts in additive manufacturing

open_access
Open Access
Author:
Denlinger, Erik Robert
Title:
thermo-mechanical model development and experimental validation for metallic parts in additive manufacturing
Graduate Program:
Mechanical Engineering
Keywords:
Additive Manufacturing
Distortion
Residual stress
Ti-6Al-4V
Inconel
FEM
Powder-bed
File:
Download disertationERD.pdf
Committee Members:
Panagiotis Michaleris, Dissertation Advisor/Co-Advisor
Reuben H Kraft, Committee Member
Eric Russell Marsh, Committee Member
Allison Michelle Beese, Committee Member
Edward William Reutzel, Committee Member

9. Toward the Repair of Components via Additive Manufacturing: Process-Structure-Property Relationships in Single Beads and Patches

open_access
Open Access
Author:
Kistler, Nathan Allen
Title:
Toward the Repair of Components via Additive Manufacturing: Process-Structure-Property Relationships in Single Beads and Patches
Graduate Program:
Materials Science and Engineering
Keywords:
Additive Manufacturing
Ti-6Al-4V
Inconel 718
Directed Energy Deposition
Laser Cladding
Laser-Material Interaction
File:
Download Kistler_MSThesis-2016.pdf
Committee Members:
Allison Michelle Beese, Thesis Advisor/Co-Advisor
Edward William Reutzel, Committee Member
Robert Allen Kimel, Committee Member
Abdalla Ramadan Nassar, Committee Member

10. Cooling Performance of Additively Manufactured Microchannels and Film Cooling Holes

open_access
Open Access
Author:
Stimpson, Curtis Kent
Title:
Cooling Performance of Additively Manufactured Microchannels and Film Cooling Holes
Graduate Program:
Mechanical Engineering
Keywords:
Additive Manufacturing
Convection
Heat Transfer
Microchannel
Roughness
Film Cooling
Laser Powder Bed Fusion
File:
Download StimpsonPhDDissertation_FINAL.pdf
Committee Members:
Karen Ann Thole, Dissertation Advisor/Co-Advisor
Karen Ann Thole, Committee Chair/Co-Chair
Stephen P Lynch, Committee Member
Rui Ni, Committee Member
Edward William Reutzel, Outside Member