Characterization and Gas Temperature Measurements of a Waveguide-based Microwave Plasma Torch
Open Access
- Author:
- Hammond, Peter J
- Graduate Program:
- Aerospace Engineering
- Degree:
- Doctor of Philosophy
- Document Type:
- Dissertation
- Date of Defense:
- May 30, 2013
- Committee Members:
- Michael Matthew Micci, Dissertation Advisor/Co-Advisor
Sven G Bilen, Committee Member
Dr Deborah A Levin, Committee Member
Victor P Pasko, Committee Member - Keywords:
- Microwave
plasma
torch - Abstract:
- Research to characterize a microwave plasma torch was initiated at Penn State University. Microwave power input into the device initiates and sustains plasma in an argon gas jet issuing from a copper nozzle into the ambient atmosphere. Protruding through a rectangular waveguide, the nozzle acts to enhance the local electric field when microwaves are excited in the waveguide. The plasma resembles a small flame, approximately 2–4 cm in length and less than 1 cm in total diameter. The primary research interests which have driven experimental design and characterization of the torch include (1) increasing plasma jet control via improved impedance matching; (2) reducing the erosion of the nozzle tips; and (3) determining the viability of applying the Penn State Microwave Plasma Torch (PSMPT) to the cutting and melting of materials via gas temperature measurements. Literature on the similar microwave torches—particularly, those of the single-electrode plasma (SEP) type—was reviewed. Several design issues were encountered during early testing with the torch. Impedance matching and nozzle erosion presented the most significant obstacles. Poor impedance matching was overcome most e ectively with an automatic tuner that could determine a match quickly. Nozzle erosion is not often addressed in the literature on SEPs. However, significant erosion was a limiting factor in early tests with the torch. More recent testing reveals that erosion can be mitigated by addition of a secondary flow of argon around the primary nozzle gas flow. Gas temperature in the plasma was deduced via OH rotational temperature measurements. Molecular nitrogen spectral interference with the OH spectra required fitting both the OH and N2 second positive system in the region of 305–318 nm. The results of this testing indicate an OH rotational temperature—and assumed gas temperature— between 2700–3400 K. These results indicate that the torch should prove useful in cutting and heat-treatment applications for some materials. Recommended areas of future study include examining the plasma for possible filamentation and enhanced spectroscopic diagnostics.