Search

Author:

Rifat, Mustafa

Title:

Surface finishing of Additively Manufactured metallic components- effect of prior surface condition and post-processing routes

Graduate Program:

Industrial Engineering (PHD)

Keywords:

Indentation
Surface Roughness
Additive Manufacturing
Microstructure
Electron Beam Melting
Direct Metal Laser Sintering
Bead-blasting
Residual Stress
Nano-scratch test
Pile-up Behavior
Hardening
Centrifugal Disc Finishing
Surface Finishing

File:

Login to Download

Committee Members:

Saurabh Basu, Chair & Dissertation Advisor
Ed De Meter, Major Field Member
Todd Palmer, Outside Unit & Field Member
Robert Voigt, Major Field Member
Steven Landry, Program Head/Chair

Author:

Gao, Mingze

Title:

Defect Formation during High Power Laser Welding of A Creep Resistant Nickel Alloy

Graduate Program:

Engineering Science and Mechanics (PHD)

Keywords:

Solidification cracking
Deep penetration
Keyhole mode laser welding
Heat transfer and fluid flow
Finite element model
Nickel alloys

File:

Download Dissertation_Mingze_Gao.pdf

Committee Members:

Albert Segall, Program Head/Chair
Tarasankar Debroy, Co-Chair & Dissertation Advisor
Jingjing Li, Outside Unit & Field Member
Todd Palmer, Co-Chair & Dissertation Advisor
Albert Segall, Major Field Member
Reginald Hamilton, Major Field Member

Author:

Shaffer, Derek

Title:

Influence of Composition on the Post-Processing Response of Additively Manufactured Precipitation Hardening Stainless Steels

Graduate Program:

Materials Science and Engineering (PHD)

Keywords:

Additive Manufacturing
Precipitation Hardening
17-4 PH
Martensitic Stainless Steel
Solution Heat Treatment
Aging

File:

Login to Download

Committee Members:

John Mauro, Program Head/Chair
Jay Keist, Outside Field Member
Amrita Basak, Outside Unit & Field Member
Tarasankar Debroy, Major Field Member
Allison Beese, Major Field Member
Todd Palmer, Chair & Dissertation Advisor

Author:

Pan, Bo

Title:

Corrosion and Mechanical-microstructural behavior of Dissimilar Al/steel joints

Graduate Program:

Industrial Engineering (PHD)

Keywords:

Intermetallic compound;
Al/steel joint
Formation mechanism
Corrosion mechanism
In-situ compression test

File:

Download Final_draft.pdf

Committee Members:

Steven Landry, Program Head/Chair
Sanjay Joshi, Major Field Member
Hongtao Sun, Major Field Member
Jingjing Li, Chair & Dissertation Advisor
Todd Palmer, Outside Unit & Field Member

Author:

Wietecha-Reiman, Ian

Title:

Probing Fatigue Failures In Additively Manufactured Titanium Alloys Using Combined Statistical Aand Fractographic Techniques

Graduate Program:

Materials Science and Engineering (MS)

Keywords:

Failure analysis
image analysis
fatigue
titanium alloys
additive manufacturing
failure analysis
image analysis
fatigue
titanium alloys
additive manufacturing
statistics
statistical modeling
processing defects
x-ray computed tomography
XCT
fractography
fractal
topology
general linear model

File:

Download MS_thesis-20230114.pdf

Committee Members:

Todd Palmer, Thesis Advisor/Co-Advisor
Albert Eliot Segall, Committee Member
John Mauro, Program Head/Chair
Jay Keist, Committee Member

Author:

Alioglu, Mecit Altan

Title:

Utilization of embedded printing for fabrication of 3D complex-shaped microfluidic devices in hydrogels and silicone composites

Graduate Program:

Engineering Science and Mechanics (PHD)

Keywords:

3D Printing
Bioprinting
Cancer-on-a-chip
Embedded Printing
Microfluidics
Silicone composite
Photocrosslinkable silicone
Organ Model Printing

File:

Login to Download

Committee Members:

Jing Du, Outside Unit & Field Member
Ibrahim Ozbolat, Chair & Dissertation Advisor
Todd Palmer, Major Field Member
Larry Cheng, Major Field Member
Francesco Costanzo, Major Field Member
Albert Segall, Program Head/Chair